Current Location:Home > Product > Ultra Audio Induction Heating Series

2018-10-26 10:22:17

Share
  • Share to WeChat Moments

Super Audio Induction Heating Equipment (RAC-40KW)

  • Description

1. Features of the equipment

1. All-solid-state IGBT frequency conversion and function adjustment, soft switching resonance dual control and frequency automatic tracking technology are the guarantee of high reliability.

2. The ultra-small size saves 10 times the production space for customers.

3. High efficiency and energy saving, high power factor and power efficiency within the full power range.

4. Broadband 10-30KHZ frequency automatic tracking adaptability, no need for on-site debugging.

5. Full-load, 24-hour continuous working ability.


Second, the use of equipment

It is a kind of direct heating equipment, which can be widely used in heat treatment of various metals, such as quenching, welding, melting, annealing, etc.

This equipment is mainly used for surface hardening of various complex shapes of steel and cast iron parts (small and medium modulus gears, machine tool guide rails, sprockets, camshafts, crankshafts, spline shafts, etc.).


3. The composition of the equipment

1. Oscillator cabinet: built-in tube oscillator, voltage stabilizer, control circuit, monitoring instrument, tank coil, tank capacitor, etc. The quenching transformer is installed on the right side of the cabinet.

2. Power cabinet: built-in voltage regulating control device, Infineon IGBT, etc.

3. Transformer cabinet: built-in transformer.


Fourth, the use environment of the equipment

1. The ambient temperature is in the range of +5℃~+40℃.

2. Dust-proof and moisture-proof.

3. Equipped with ventilation equipment to remove the foul gas generated during quenching.

 

5. Water supply of equipment

1. Total water consumption: 5000 liters/hour.

2. The water pressure is between 0, 1-1, 5 atmospheres.

3. The hardness of water is not more than 0.017 g/L.

4. The resistance of water is not less than 4000 ohms/cubic centimeter.

5. The water inlet pipe of the equipment is Φ1" steel pipe and two 1" steel pipes.

6. The drain pipes are Φ1″ steel pipes and two 1″ steel pipes. In order to save water, a reservoir should be set up, and the water discharged from the equipment should be recycled for use, and the capacity of the water tank should not be less than 15 cubic meters.

Recommended Products

HOME About Us Product News Case Video Advantages Contact